您的位置：HUA DE carpet > News > Carpet Knowledge
The installation of the stair tread carpet
发布时间：2015-11-02 点击次数：
Stair tread blanket is mainly played the home of the ladder stairs scratches and excessive use of wear and tear, thus prolonging the service life of the stairs, with super anti-slip function, can protect to the safety of the people when fluctuation stair, at the same time it also has a good effect on mute, can protect you from the stairs when the noise interference.Such a practical performance is very strong stair tread blanket, common standard size 65 cm * 24 cm * 3 cm, suitable for stair tread width is 70 cm to 120 cm of any material stair treads, widely applicable.
Stair tread carpet installation method is as follows:
1, stair tread blanket before installation, need to clean up the stairs need to lay all, cannot have hard material existence, it is best not to legacy sand;
2, stair to clean after, you can start to measure the size of the stair tread under the blanket, depending on the amount of such a size, coupled with the size of the reserved at its side, again come out the size of the final good can determine the location of the installation;
3, determine the position of the good stair tread carpet installation, hand hold the tread blanket in the front, then tore to PVC keel parts of the tape, paste it on the stair tread, with a rubber mallet or compression tape by hand and tread touching part;
4, a blanket in front side, again tore to the other two small tape, stick it tightly is ok;
5, you will tread stair carpet glue, best don't trample tape 2 hours, so as not to fall off.